Arris C4C - Configure Interface Gigabitethernet Ip Igmp Query-Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1747
configure interface gigabitethernet * ip igmp query-interval
Purpose
Sets the query interval.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp query-interval <query interval>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp query-interval [<query interval>] no
Supplemental
Information
To remove the query interval, use the no version.
Parameters
<slot></port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<query interval>
Query interval (seconds)