Arris C4C - Show Cable Modem Summary Port

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2719
show cable modem summary port
Purpose
Displays the summary counts on a port level.
Default Access Level
1
Command Syntax
show cable modem summary port [cable-mac <0-415>] [fiber-note <word>] [mac <mac_id>] [slot <num>] [state
<state>]
Supplemental
Information
This command is helpful in debugging CM's stuck in various initialization states.
Parameters
cable-mac <0-415>
Displays summary counts on a port level organized by the cable mac.
fiber-node <word>
Displays summary counts on a port level organized by fiber-node.
mac <mac_id>
Displays summary counts on a port level organized by the cable mac.
slot <num>
CAM slot number. Valid range for the C4 CMTS is 0-15; valid range for the C4c CMTS is 10-15.
state <state>
Displays transitional and other states not shown on summary command.
Related Commands
show cable modem (page 2670)