Arris C4C - Configure Interface Gigabitethernet Ip Rip Authentication Key-Chain

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1773
configure interface gigabitethernet * ip rip authentication key-chain
Purpose
Specified the set of keys that can be used on the specified interface.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip rip authentication key-chain <keychain1>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip rip authentication key-chain
[<keychain1>] no
Supplemental
Information
To remove the set of keys used on the specified interface, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<keychain1>
A 1-16 character text string used for authentication.