Arris C4C - Configure Ipv6 Router Ospf Redistribute Pd

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2141
configure ipv6 router ospf redistribute pd
Purpose
Redistributes PD routes into OSPF. PD routes are subnets assigned to a CPE router by DHCP.
Default Access Level
15
Command Syntax
configure ipv6 router ospf redistribute pd {metric <1-16777215> | metric-type <1|2> | tag <integer>}
configure ipv6 router ospf redistribute pd {metric <1-16777215> | metric-type <1|2> | tag <integer>} no
Supplemental
Information
To remove the PD configuration, use the no option.
Parameters
<1-16777215>
OSPF default metric.
<1 | 2>
1 = Set OSPF External Type 1 metrics
2 = Set OSPF External Type 2 metrics
<integer>
Value attached to each external redistributed route.