Arris C4C - Сonfigure Interface Cable-Mac Ipv6 Ospf Network

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1668
configure interface cable-mac * ipv6 ospf network
Purpose
Configures the OSPF network type to a type other than the default for a given media.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac[.0]> ipv6 ospf network <type>
configure interface cable-mac <mac[.0]> ipv6 ospf network <type> no
Supplemental
Information
To return to the default, use the no option.
Parameters
<mac[.0]>
The MAC identifier and optional sub interface.
<type>
Network type. Current type supported is broadcast or point-to-point.