Arris C4C - Configure Interface Link-Aggregate Description

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1835
configure interface link-aggregate * description
Purpose
Allows you to add a comment or a description to help you remember what is attached to this interface.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> description <text>
configure interface link-aggregate <0-9[.0-254]> description no
Supplemental
Information
To remove the description, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<text>
Descriptive information, e.g., identifies area served. Text is limited to 32 characters.