Arris C4C - Configure Interface Tengigabitethernet Ip Igmp

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1968
configure interface tengigabitethernet * ip igmp
Purpose
Enables IGMP on the specified interface.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot/port> ip igmp
configure interface tengigabitethernet <slot/port> ip igmp no
Supplemental
Information
To disable the IGMP on the interface, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]