Arris C4C - Configure Router Isis Authentication Key-Chain

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2450
configure router isis authentication key-chain
Purpose
Configures the router IS-IS authentication key-chain.
Default Access Level
15
Command Syntax
configure router isis authentication key-chain <name> [<level-1 | level-2>]
configure router isis authentication key-chain [<name>] [<level-1 | level-2>] no
Supplemental
Information
Note: All commands that include key-chains required that the key-chain already exists before the command is executed. In addition,
the key-chain should not be deleted until after the command(s) that reference it have been reset with the "no" command.
To remove the router IS-IS authentication key-chain, use the no option.
Parameters
<name>
Name of the key-chain
[<level-1 | level-2>]
ISIS authentication for level-1 or level-2