To Next Page

To Previous Page

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide

configure interface tengigabitethernet * ipv6 nd prefix * at

Purpose

Sets the lifetime and advertisements for prefix along with the date and time the prefix expires on the specified interface.

Default Access Level

Command Syntax

configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 nd prefix <word> at <valid_date>

<preferred_date> [off-link] [no-autoconfig] [autoconfig]

configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 nd prefix <word> at <valid_date>

<preferred_date> [off-link] [no-autoconfig] [autoconfig] no

Supplemental

Information

To restore the default setting, use the no option.

Parameters

<slot>/<port>[.<0-

254>]

RCM slot number/tengigabitEthernet port number[.subinterface number].

Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]

Valid range for the C4c CMTS is <17>/<10>[.<0-254>]

<word>

IPv6 address

[off-link]

Indicates prefix is not locally reachable by hosts and must be routed.

[no-autoconfig]

Indicates that the host may not use prefix for auto-configured IPv6 addresses.

<valid_date>

Valid date in year:month:day:hour:minute:second

[<preferred_date>]

Preferred date in the format: year:month:day:hour:minute:second

[off-link]

Indicates prefix is not locally reachable by hosts and must be routed.

[no-autoconfig]

Indicates that the host may not use prefix for auto-configured IPv6 addresses.

[autoconfig]

Indicates that the host may use prefix for auto-configured IPv5 addresses.

Arris C4C User Manual

Questions and Answers: