Arris C4C - Show Cable Dsg Vsp-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2648
show cable dsg vsp-list
Purpose
Displays the provisioned vendor-specific settings including the vendor-set identifier, vendor oui and vendor value pairs.
Default Access Level
1
Command Syntax
show cable dsg vsp-list [vendorsetid]
Supplemental
Information
If the vendor-set identifier [vendorsetid] is given. then only those vendor-set parameters belonging to that vendor-set identifier are
displayed. If the vendor-set identifier is omitted, then all vendor-set parameter data is displayed.
Note: If a vendor parameter set is not associated with an interface, then the set identifying number will be preceded by a plus
symbol (+). This is done to assist the user in identifying provisioning disconnects.
Parameters
[vendorsetid]
Identifier of the vendor set to be associated with the downstream interface.