Arris C4C - Configure Route-Map-Policy Deny Match Ip Address

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2310
configure route-map-policy * deny * match ip address
Purpose
Configures conditions that deny a route based on the IP address.
Default Access Level
15
Command Syntax
configure route-map-policy <name> deny [<int>] match ip address <word>
configure route-map-policy <name> deny [<int>] match ip address [<word>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<name>
Name of this route-map
[<int>]
Sequence number
<word>
Access list name or number