Arris C4C - Configure Interface Gigabitethernet Ipv6 Traffic-Filter

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1813
configure interface gigabitethernet * ipv6 traffic-filter
Purpose
Configures the data plane filter ACL application for a specified interface/direction.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ipv6 traffic-filter <aclName> <in | out>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ipv6 traffic-filter <aclName> <in | out> no
Supplemental
Information
To remove, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<aclName>
IPv6 access list name.
<in | out>
Designates inbound or outbound packets.