Arris C4C - Configure Router Bgp Distribute-List out Rip

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2398
configure router bgp * distribute-list * out rip
Purpose
Configures filtering for outbound BGP routes for the RIP routing process.
Default Access Level
15
Command Syntax
configure router bgp [<int>] distribute-list <1-99> out rip
configure router bgp [<int>] distribute-list <1-99> out rip no
Supplemental
Information
To disable this function, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<1-99>
Access list used for filtering