Arris C4C - Configure Interface Loopback Description

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1941
configure interface loopback * description
Purpose
Allows you to add a comment or a description to help you remember what is attached to this interface.
Default Access Level
15
Command Syntax
configure interface loopback <0-15> description <text>
configure interface loopback <0-15> description no
Supplemental
Information
To remove the description, use the no option.
Parameters
<0-15>
The Loopback interface number. Valid range is 0 to 15.
<text>
Descriptive information, e.g., identifies area served. Text is limited to 32 characters.