Arris C4C - Configure Router Bgp Neighbor As-Origin-Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2404
configure router bgp * neighbor * as-origin-interval
Purpose
Configures the minimum interval between originating routes from the AS.
Default Access Level
15
Command Syntax
configure router bgp [<int>] neighbor <ipv6> as-origin-interval <sec>
configure router bgp [<int>] neighbor <ipv6> as-origin-interval [<sec>] no
Supplemental
Information
To remove an entry, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<ipv6>
IPv6 address.
<sec>
Minimum interval in seconds between routing updates. Valid range is 1-65535.