Arris C4C - Configure Authorization

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1250
configure authorization
Purpose
Configures the authorization method list.
Default Access Level
15
Command Syntax
configure authorization <listname> [local] [tacacs <groupname>] [none]
configure authorization <listname> [local] [tacacs <groupname>] [none] no
Supplemental
Information
Note: The none parameter should not be used when configuring authentication lists due to the resulting lack of security.
To remove the authorization method list, use the no option.
Parameters
<listname>
String identifying this method list
[local]
Authorize according to the privilege level associated with the current user ID
[tacacs
<groupname>]
Authorize all commands using the specified TACACS+ server group.
Groupname is the string identifying the TACACS+ server group to use.
[none]
No authorization is required
Related Commands
configure tacacs group * host (page 2560)
configure authentication (page 1249)
configure line vty (page 2175)