Arris C4C - Configure Router Isis Metric-Style

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2464
configure router isis metric-style
Purpose
Configures the type of metric the C4 CMTS will generate or accept.
Default Access Level
15
Command Syntax
configure router isis metric-style <narrow | transition | wide> [<level-1 | level-1-2 | level-2>]
configure router isis metric-style <narrow | transition | wide> [<level-1 | level-1-2 | level-2>] no
Supplemental
Information
To restore the default value, use the no option.
Parameters
<narrow |
transition | wide>
Metric-style narrow – enables the router to advertise and accept only old-style TLVs.
Metric-style transition – enables the router to advertise and accept both styles of TLVs.
Metric-style wide – enables the router to advertise and accept only new-style TLVs.
[<level-1 | level-1-2
| level-2>]
Specifies the type of adjacencies to be formed on this interface. If no value is specified, then modify value for both level-1 and level-
2.