Arris C4C - Configure Router Isis Address-Family Ipv6 Distribute-List out

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2442
configure router isis address-family ipv6 distribute-list * out
Purpose
Configures the filtering for outbound IS-IS routes.
Default Access Level
15
Command Syntax
configure router isis address-family ipv6 distribute-list <word> out [connected | static | pd]
configure router isis address-family ipv6 distribute-list <word> out [connected | static | pd] no
Supplemental
Information
To disable the filtering, use the no option.
Parameters
<word>
IPV6 access list name
[connected]
Filters IS-IS routes originating from a connected source.
[static]
Filters IS-IS routes originating from a static configuration.
[pd]
Filters IS-IS routes originating from a prefix delegation route.