Arris C4C - Configure Snmp-Server Group

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2544
configure snmp-server group
Purpose
Defines a User Security Model group.
Default Access Level
15
Command Syntax
configure snmp-server group <group name> [version <v1|v2c|v3>] [auth|noauth|priv] [read <read view>]
[write <write view>] [notify <notify view>] [access <access list>]
configure snmp-server group <group name> [version <v1|v2c|v3>] [auth|noauth|priv] [read <read view>]
[write <write view>] [notify <notify view>] [access <access list>] no
Supplemental
Information
To remove a User Security Model group, use the no option.
Parameters
<group name>
The name assigned to the SNMP group
[version
<v1|v2c|v3>]
Version level of security. v1= least security; v2=next level; v3=most security
[auth|noauth|priv]
V3 type (authentication, no authentication, privacy)
[read <read view>]
Defines read-only access or read-only to specified view
[write <write
view>]
Defines write access or write access to specified view
[notify <notify
view>]
Defines notify access or notify access to specified view
[access <access
list>]
Defines access list