Arris C4C - Configure Interface Tengigabitethernet Ip Pim Hello-Holdtime

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1996
configure interface tengigabitethernet * ip pim hello-holdtime
Purpose
Configures the PIM router neighbor hold time option in the Hello message.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip pim hello-holdtime <int>
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip pim hello-holdtime [<int>] no
Supplemental
Information
To reset the hold time, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]
<int>
Hold time in seconds