Arris C4C - Show Port Status

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 3001
show port status
Purpose
Displays the port level upstream and downstream information on the module in the specified slot.
Default Access Level
1
Command Syntax
show port status <slot[/port]> [full]
Supplemental
Information
NOTE: This command will not report status of spare master ports. It will report only the state of the protected ports.
Parameters
<slot[/port]>
Displays the appropriate ports for the given interface.
[full]
Displays ports even if missing cable-mac association.