Arris C4C - Show Ip Ospf Database

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2862
show ip ospf database
Purpose
Shows the OSPF database information.
Default Access Level
1
Command Syntax
show ip ospf [vrf <name>] database [adv-router [<a.b.c.d>] [asbr-summary [<a.b.c.d>]]
Supplemental
Information
N/A
Parameters
[vrf <vrf name>]
Name given to VRF. To display only the default VRF, enter "default" as the VRF name.
[adv-router
[<a.b.c.d.>]]
Advertising Router link states (as an IP address)
[asbr-summary
[<a.b.c.d.>]]
The ASBR summary link states link state ID (as an IP address)