Arris C4C - Сonfigure Enable

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1463
configure enable
Purpose
Sets the password for granting access to privileged commands.
Default Access Level
15
Command Syntax
configure enable [privilege <level>] [password <password>]
configure enable [privilege <level>] [password <password>] no
Supplemental
Information
To clear the password used to grant access to privileged commands to null, use the no option.
Parameters
[privilege <level>]
Privilege level for which the password applies. Current level range is 0 -15. To see default levels, use the command:
show privilege exec
[password
<password>]
The password (byte string) you want assigned. The system currently allows up to 16 characters for password.
Related Commands
disable (page 2580)
configure privilege exec level (page 2234)