Arris C4C - Configure Route-Map Set As-Path Prepend

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2294
configure route-map * set as-path prepend
Purpose
Appends a string to the autonomous system path.
Default Access Level
15
Command Syntax
configure route-map <name> set as-path prepend <word>
configure route-map <name> set as-path prepend [<word>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<name>
Name of this route-map.
<word>
String of autonomous system numbers to append