Arris C4C - Configure Router Bgp Aggregate-Address As-Set Summary-Only

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2378
configure router bgp * aggregate-address * as-set summary-only
Purpose
Configures the routes so that only the aggregate route would be advertised out and the aggregate route would have the AS_PATHS
of all the specific routes.
Default Access Level
15
Command Syntax
configure router bgp <int> aggregate-address <A.B.C.D> <mask> as-set summary-only
configure router bgp <int> aggregate-address <A.B.C.D> <mask> as-set summary-only no
Supplemental
Information
To disable, use the no option.
Parameters
<int>
Autonomous System (AS) number. Valid range is 1-65535
<A.B.C.D>
IP address of the aggregate.
<mask>
Aggregate mask.