Arris C4C - Send Vty

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2618
send vty
Purpose
Sends a message to a specified VTY session.
Default Access Level
15
Command Syntax
send vty <0-15> [<message>]
Supplemental
Information
N/A
Parameters
<0-15>
Console line number
[<message>]
Message to be sent. Use multiple lines as needed. /end terminates message and Crtl-C will abort message.