Arris C4C - Configure Router Bgp Neighbor Update-Source Gigabitethernet Remote-As

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2418
configure router bgp * neighbor * update-source gigabitethernet * remote-as
Purpose
Configures the source address for the session.
Default Access Level
15
Command Syntax
configure router bgp [<int>] neighbor <ipv6> update-source gigabitethernet <6-7>/<0-7>[.<0-254>]
remote-as <int>
Supplemental
Information
N/A
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<ipv6>
IPv6address
<slot>/port>
[.<subint>]
RCM slot number/gigabitEthernet port number.
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<int>
Autonomous System (AS) number of the neighbor