Arris C4C - Configure Route-Map-Policy Permit Set Ip Tos

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2321
configure route-map-policy * permit * set ip tos
Purpose
Configures the IP TOS values.
Default Access Level
15
Command Syntax
configure route-map-policy <name> permit <int> set ip tos <normal | min-monitary-cost | max-reliability
| max-throughput | min-delay>
configure route-map-policy <name> permit <int> set ip tos [<normal | min-monitary-cost | max-reliability
| max-throughput | min-delay>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<name>
Name of this route-map
<int>
Sequence number