Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2172
configure line * accounting
Purpose
Configures shell and/or command accounting.
Default Access Level
15
Command Syntax
configure line <console | vty> [width <11-512>] <startline> [endline] accounting [command <int>] [shell]
<word> [{start-stop | stop-only}]
configure line <console | vty> [width <11-512>] <startline> [endline] accounting [command <int>] [shell]
<word> [{start-stop | stop-only}] no
Supplemental
Information
To disable shell and/or command accounting, use the no option.
Parameters
console
Configures the SCM console port. The CLI will accept 0 (zero) or 1.
vty
Configures a virtual terminal. For the C4 CMTS, this refers to a telnet session. Range of line numbers is 0 to 15.
[width <11-512>]
Sets the width of the terminal
<startline>
Integer identifying line number or first line number of a range of line numbers
[<endline>]
Integer identifying last line number of a range of line numbers
[command <int>]
Enables command accounting
[shell]
Enables shell accounting
<word>
Accounting method list
[{start-stop |
Sends accounting record at the initiation and termination of a session
stop-only}]
Sends accounting record only at the termination of a session

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English