Arris C4C - Configure Route-Map-Policy Permit Set Ip Interface Null

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2317
configure route-map-policy * permit * set ip interface null
Purpose
Configures a route map to null interface to drop certain traffic.
Default Access Level
15
Command Syntax
configure route-map-policy <name> permit <int> set ip interface null <0-0>
configure route-map-policy <name> permit <int> set ip interface null [<0-0>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<name>
Name of this route-map
<int>
Sequence number
<0-0>
Null interface zero