Arris C4C - Configure Interface Tengigabitethernet Ip Igmp Access-Group

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1970
configure interface tengigabitethernet * ip igmp access-group
Purpose
Creates the IGMP group access group.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip igmp access-group <1-99>
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip igmp access-group [<1-99>] no
Supplemental
Information
To remove the IGMP group access group, use no option of the command.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]
<1-99>
IP standard access list.