Arris C4C - Configure Route-Map-Policy Set Ip Recursive-Next-Hop

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2327
configure route-map-policy * set ip recursive-next-hop
Purpose
Sets a recursive next-hop IP address.
Default Access Level
15
Command Syntax
configure route-map-policy <word> set ip recursive-next-hop <a.b.c.d>
configure route-map-policy <word> set ip recursive-next-hop <a.b.c.d> no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<word>
Name of this route-map
<a.b.c.d>
IPv4 or IPv6 address.