Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2118
configure ipv6 neighbor * tengigabitethernet
Purpose
Creates or deletes a static entry in the neighbor discovery (ND) cache for the interface using the tengigabitEthernet interface
Default Access Level
15
Command Syntax
configure ipv6 neighbor <ipv6 address> tengigabitethernet <interface> <mac-address>
configure ipv6 neighbor <ipv6 address> tengigabitethernet [<interface>] [<mac-address>] no
Supplemental
Information
To remove the neighbor, use the no option.
Parameters
<ipv6-address>
The address of the neighbor. It is in hexidecimal using 16-bit values between colons.
<interface>
The number of the interface in <RCM slot>/<port > format.
Valid range for the C4 CMTS is <17-18>/<10>
Valid range for the C4c CMTS is <17>/<10>
<mac-address>
The 48-bit ethernet address used to address the node on the interface.

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English