Arris C4C - Configure Route-Map Set Local-Preference

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2304
configure route-map * set local-preference
Purpose
Sets the local preference of routes within a specified local autonomous system.
Default Access Level
15
Command Syntax
configure route-map <name> set local-preference <int>
configure route-map <name> set local-preference [<int>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<name>
Name of this route-map.
<int>
Local preference