Arris C4C - Configure Interface Cable-Mac;Cable Reg-Rsp-Timer-T6

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1571
configure interface cable-mac * cable reg-rsp-timer-t6
Purpose
Overrides the default value of the T6 timer in the cable modem.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac> cable reg-rsp-timer-t6 <time>
configure interface cable-mac <mac> cable reg-rsp-timer-t6 [<time>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<mac>
The MAC identifier. Valid numbers are 0-415.
<hex>
Receive channel profile ID in hex (5 byte).
<int>
Unique RCC ID for rcp-id defined earlier
<1-32>
Must be unique within the RCC; it identifies the receive mode instance within the RCC and corresponds to the attribute.
<time>
Uses the specified time (in seconds) in place of the default value for the T6 timer.