EasyManua.ls Logo

Arris C4C - Configure Interface Gigabitethernet Ip Igmp Stati-Cgroup

Arris C4C
3180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1750
configure interface gigabitethernet * ip igmp stati-cgroup
Purpose
Statically adds membership to an IP multicast group on an IP virtual interface.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp static-group <group> [source
<domain-name | source-ip>]
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp static-group <group> [source
<domain-name | source-ip>] no
Supplemental
Information
To remove membership to an IP multicast group on an IP virtual interface, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<group>
Multicast group IP address.
<domain-name>
Qualified domain name
<source-ip>
IPv4 address

Table of Contents

Related product manuals