Arris C4C - Baseline Privacy: CLI Commands; Configure Cable Commands

Chapter 18: Baseline Privacy Interface (BPI)
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 608
Trap Code
Name
Process
ANM_DOCSIS_B502_3
TEK Invalid — No information.
TEK exchange
Problem: The modem’s traffic key is now invalid.
Action: There is no corrective action that can be taken. The system will recover the error.
ANM_DOCSIS_B502_6
TEK Invalid — Invalid key sequence number
TEK exchange
Problem: This trap indicates that a packet was received from the respective modem which has an
key sequence value out of the range of valid traffic keys.
Action: There is no corrective action that can be taken. The system will recover the error.
ANM_DOCSIS_B502_3
TEK Invalid — No information.
TEK exchange
Problem: The modem’s traffic key is now invalid.
Action: There is no corrective action that can be taken. The system will recover the error.
ANM_DOCSIS_B502_6
TEK Invalid — Invalid key sequence number
TEK exchange
Problem: This trap indicates that a packet was received from the respective modem which has an
key sequence value an out of the range of valid traffic keys.
Action: There is no corrective action that can be taken. The system will recover the error.
Baseline Privacy: CLI Commands
Configure Cable Commands
configure cable privacy ?
add-certificate - Adds a manufacturer or root CA certificate or
Cable Modem certificate
ca-cert-trust - Configure CA certificate's trust state
cm-cert-trust - Configure cable modem certificate trust state
configure cable privacy add-certificate ?