Arris C4C - Configure L2 Vpn Network-Interface Gigabitethernet

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2167
configure l2vpn network-interface gigabitethernet
Purpose
Configures the primary and optional secondary L2VPN network interfaces.
Default Access Level
15
Command Syntax
configure l2vpn network-interface gigabitethernet <slot/port> <primary|secondary>
configure l2vpn network-interface gigabitethernet <slot/port> <primary|secondary> no
Supplemental
Information
To return to the default, use the no version.
Parameters
<slot>/port>
RCM slot number/gigabitEthernet port number.
Valid range for the C4 CMTS is <17-18>/<0-9>
Valid range for the C4c CMTS is <17>/<0-9>
<primary|secondary
>
Specifies either single or dual Q-tag encapsulation.