Arris C4C - Show Ip Ospf Database Opaque-Area

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2866
show ip ospf database opaque-area
Purpose
Shows the OSPF Opaque Area link states.
Default Access Level
1
Command Syntax
show ip ospf [vrf <name>] database opaque-area [<a.b.c.d>] [asbr-summary [<a.b.c.d>]]
Supplemental
Information
N/A
Parameters
[vrf <vrf name>]
Name given to VRF. To display only the default VRF, enter "default" as the VRF name.
[<a.b.c.d>]
Link state ID (as an IP address).
[adv-router
[<a.b.c.d>]]
Advertising Router link states (as an IP address)