Arris C4C - Show Interface Gigabitethernet Access-Group

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2815
show interface gigabitethernet * access-group
Purpose
Displays the access control information for the gigabitEthernet interfaces on the Router Control Modules (RCMs).
Default Access Level
15
Command Syntax
show interface gigabitethernet <slot>/<port> access-group
Supplemental
Information
N/A
Parameters
<slot>/<port>
The slot in which the targeted module resides. The slot must contain an RCM.
Valid range for the C4 CMTS is <17-18>/<0-9>
Valid range for the C4c CMTS is <17>/<0-9>