Arris C4C - Configure Ip Ssh Max-Auth-Fail

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2085
configure ip ssh max-auth-fail
Purpose
Configures the maximum number of client authentication failures.
Default Access Level
15
Command Syntax
configure ip ssh max-auth-fail <number>
Supplemental
Information
This counter is for both public key and password authentication failures.
Parameters
<number>
Includes both CLI and sftp sessions. The default is 0 (unlimited).