Arris C4C - Router Bgp Aggregate-Address As-Set Summary-Only Attribute-Map

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2380
configure router bgp * aggregate-address * as-set summary-only attribute-map
Purpose
Sets the Community attribute on the aggregate route giving the user a chance to change, for the aggregate route, the otherwise
inherited Community attributes from the specific routes.
Default Access Level
15
Command Syntax
configure router bgp <int> aggregate-address <A.B.C.D> <mask> as-set summary-only attribute-map
<attribute map>
configure router bgp <int> aggregate-address <A.B.C.D> <mask> as-set summary-only attribute-map
<attribute map> no
Supplemental
Information
To disable, use the no option.
Parameters
<int>
Autonomous System (AS) number. Valid range is 1-65535
<A.B.C.D>
IP address of the aggregate.
<mask>
Aggregate mask.
<attribute map>
Your attribute map.