Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2307
configure route-map * set weight
Purpose
Specifies the weight of this route. Weight is the relative preference within the C4 CMTS.
Default Access Level
15
Command Syntax
configure route-map <name> set weight <int>
configure route-map <name> set weight [<int>] no
Supplemental
Information
Weight can be altered by this command on routes learned from other BGP routers, but cannot be set on routes redistributed into
BGP from other protocols.
To return to the default setting, use the no option.
Parameters
<name>
Name of this route-map.
<int>
Weight

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English