Arris C4C - Configure Route-Map Match Ipv6 Next-Hop Prefix-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2269
configure route-map * match ipv6 next-hop prefix-list
Purpose
Matches routes that have a next hop address of route in the specified prefix-list.
Default Access Level
15
Command Syntax
configure route-map <word> match ip next-hop prefix-list <name>
configure route-map <word> match ip next-hop [prefix-list <name>] no
Supplemental
Information
To remove the next hop entry, use the no option.
Parameters
<word>
Name of this route-map
<name>
Name of a specific prefix list.