Arris C4C - Configure Interface Gigabitethernet Encapsulation Dot1 Q

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1730
configure interface gigabitethernet * encapsulation dot1q
Purpose
Sets the encapsulation type for the specified interface to Q-tag, as defined by IEEE 802.1Q.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] encapsulation dot1q <int>
configure interface gigabitethernet <slot>/<port>[.<0-254>] encapsulation dot1q [<int>] no
Supplemental
Information
To return to default settings, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<int>
Q-tag as defined by IEEE 802.1Q