Arris C4C - Configure Packetcable Eventmsg Max-Age

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2215
configure packetcable eventmsg max-age
Purpose
Configures the maximum age for PacketCable Event Messaging in minutes.
Default Access Level
15
Command Syntax
configure packetcable eventmsg max-age <minutes>
Supplemental
Information
Note: The CMTS uses the static port 1813 for Event Messages. The CMTS listens to port 1813 all the time. When it sends a message
to an RKS at whatever destination IP and port, port 1813 shows up as the source port in the UDP header.
Parameters
<minutes>
Maximum age for event message in minutes. Default is set for one minute.