Arris C4C - Show Ipv6 Route Gigabitethernet

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2935
show ipv6 route * gigabitethernet
Purpose
Displays the IPv6 routes for the specified gigabitethernet interface.
Default Access Level
1
Command Syntax
show ipv6 route [vrf <name>] [include-inactive] [detail] gigabitethernet <17-18>/<0-9>[.<0-254>]
Supplemental
Information
N/A
Parameters
[vrf <name>]
Name given to VRF. To display only the default VRF, enter "default" as the VRF name.
[incl-inactive]
Includes all active and dynamic inactive routes. Does not display inactive static routes.
[detail]
Shows same routes in a non-abbreviated format.
<17-18>/
<0-9>[.<0-254>]
The RCM slot number/gigabitethernet port number[.subinterface number]