Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2019
configure interface tengigabitethernet * ipv6 nd managed-config-flag
Purpose
Sets the ‘managed address configuration’ flag in IPVv6 router advertisements on the specified interface.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 nd managed-config-flag
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 nd managed-config-flag no
Supplemental
Information
Setting this flag indicates that the cable modems and CPE devices should use DHCPv6 to obtain their IPv6 addresses.
To restore the default setting, use the no option of the command.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English