Arris C4C - Configure Snmp-Server Data Max-Read-Ahead

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2538
configure snmp-server data max-read-ahead
Purpose
Sets the maximum number of records to read ahead for all (CLI, IPDR, SNMP-Agent).
Default Access Level
15
Command Syntax
configure snmp-server data max-read-ahead <0-20>
configure snmp-server data max-read-ahead [<0-20>] no
Supplemental
Information
To reset to the default, use the no option.
Parameters
<0-20>
Maximum number of records to read ahead.