Arris C4C - Configure Interface Tengigabitethernet Ipv6 Ospf Retransmit-Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2040
configure interface tengigabitethernet * ipv6 ospf retransmit-interval
Purpose
Specifies the time between link-state advertisement (LSA) retransmissions for adjacencies belonging to the interface.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 ospf retransmit-interval <1-1800>
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 ospf retransmit-interval [<1-1800>]
no
Supplemental
Information
To reset to the default, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]
<1-1800>
Time in seconds between transmissions.